PCCC4-10


	English		Việt Nam

DANH MỤC SẢN PHẨM

TIN TỨC MỚI

Hà Nội trang bị kiến thức phòng cháy cho hơn 3000 giá viên
GD&TĐ - Công an TP Hà Nội phối hợp với Sở GD&ĐT Hà Nội vừa tổ chức lớp tập huấn nghiệp vụ phòng cháy, chữa cháy và cứu ...

KHÔNG LẼ BẤT LỰC???
Nguy cơ cháy nổ tại nhà cao tầng đã và đang trở thành mối đe dọa trong đời sống dân cư đô thị....

Xem toàn bộ

THÔNG TIN CẦN BIẾT

	Lịch chiếu phim rạp
	Tỉ giá ngoại tệ
	Thông tin chứng khoán
	Thông tin giá vàng
	Kết quả xổ số

QUẢNG CÁO

6300 Fire Alarm Control Panel

The Protec Algo-Tec™ 6300 is an interactive digital addressable fire detection and alarm system ideally suited for small , medium & large sized buildings such as nursing homes, hotels and offices. The control panel is designed and manufactured by Protec to comply with EN 54-2 & 4. The control panel is available as surface or recessed mounted with a moulded polycarbonate hinged door finished in storm grey, or optionally with polished solid brass or brushed stainless steel finish for recess mounting only.

Up to 32 Algo-Tec™ 6300 control and repeat panels and illuminated zonal mimics can be interconnected using the optional add in 6300 network card. Wired as a loop the networks dual channel fault tolerant RS485 ensures that no single fault can disable the system. In the event of multiple faults, each panel will function independently. The network can be wired using copper or fibre optic cables.

Each 6300 control panel is equipped with 1, 2 or 4 high capacity Algo-Tec™ digital addressable data loops, with up to 191 address capacity per loop. Total panel devices is restricted to 512 inputs to comply with EN54 part 2. In addition to sensors, interfaces and manual call points the loop can also support loop powered SOUNDERS, VISUAL ALARM DEVICES and OPTICAL BEAM DETECTORS. Loop powered sounder bases adopt the sensor address to increase the capacity of the loops still further, resulting in reduced cabling requirements, simplified installation and associated cost savings.

MÔ TẢ CHI TIẾT:

Power Supply	Mains 230V ac nominal ± 10%
Working Voltage	21.5 - 30V dc
Temperature Range	0 - 40°C
Maximum Humidity	85% Non-condensing
Panel Model	6301 6302 6304
Standby Load (Mains Fail Condition)	90mA 115mA 170mA
Alarm Load (Mains Fail Condition)	210mA 260mA 345mA
Display	Backlit liquid crystal display 2 lines of 40 characters
Digital Addressable Loops	1,2 or 4 loops, each with 191 address capacity. Total panel capacity is restricted to 512 Input addresses to comply with EN 54-2. Algo-Tec™ 6000 Protocol.
Total Loop Load	600mA per loop including all loop connected devices
Zones	32 Zone LED’s plus twin red common fire indicators
Integral Charger	3A dc Switch-mode.
Integral Battery	10Ah 24V sealed lead acid
Remote Power Supply	The Protec 9000/BC range of power supplies are compatible with the 6300 panels. Dual path outputs and fault signalling, (4 wire plus 2 wire, 2 primary power, 2 signals, 2 secondary power).
Programmable Alarm Outputs	4 Monitored - Internal sounder circuits (1A rated @ 24V). 1 Set of non-monitored double-pole changeover contacts (1A rated @ 24V). Up to 191 alarm outputs per loop with the use of additional loop O/P devices.
Alarm Load	Maximum 3A with integral power supply unit
Fault Monitoring	Fully fault monitored to EN 54-2
Fault Output	Single pole changeover contacts (1A rated @ 24V)
Serial Communications Interface	4 wire (2 power, 2 data) for up to 4 repeat/mimic panels.
Secure Network	To replace above serial interface when optional 6300 network card fitted to allow up to 32 panels / repeaters to be securely networked (2 wire loop).
Auxiliary Output	Supply 24V dc fused at 250mA.
Common Fire Output (fire station)	24V dc fully monitored output rated at 20mA. 1K EOL.
Common Fault Output (fire station)	24V dc fully monitored output rated at 20mA. 1K EOL.
RS232 Communications Interface	9 way 'D' type connector (Male). For program/text software upload/download.
Optional Integral Printer	40 character low noise thermal printer.
Dimensions (mm)	440(W) x 385(H) x 144(D)
Approvals (6301)	LPCB Certificate No: 201ad/07, EC Certificate No: 0832-CPD-1474, Relevant Standard: EN 54-2 & 4.
Approvals (6302)	LPCB Certificate No: 201ad/08, EC Certificate No: 0832-CPD-1475, Relevant Standard: EN 54-2 & 4
Approvals (6304)	LPCB Certificate No: 201ad/09, EC Certificate No: 0832-CPD-1476, Relevant Standard: EN 54-2 & 4