PCCC4-10


	English		Việt Nam

DANH MỤC SẢN PHẨM

TIN TỨC MỚI

Hà Nội trang bị kiến thức phòng cháy cho hơn 3000 giá viên
GD&TĐ - Công an TP Hà Nội phối hợp với Sở GD&ĐT Hà Nội vừa tổ chức lớp tập huấn nghiệp vụ phòng cháy, chữa cháy và cứu ...

KHÔNG LẼ BẤT LỰC???
Nguy cơ cháy nổ tại nhà cao tầng đã và đang trở thành mối đe dọa trong đời sống dân cư đô thị....

Xem toàn bộ

THÔNG TIN CẦN BIẾT

	Lịch chiếu phim rạp
	Tỉ giá ngoại tệ
	Thông tin chứng khoán
	Thông tin giá vàng
	Kết quả xổ số

QUẢNG CÁO

6400 Fire Alarm Control Panel

6400/DCN - Display and Control Node

Display and controls of the Algo-Tec™ 6400 system are via 6400/DCN’s. All the functions of the 6400/DCN are accessed via a modern styled hinged lockable door, moulded from polycarbonate, finished in storm grey with a clear display viewing window, optional polished solid brass or brushed stainless steel finishes for recess mounting only. When opened, the door allows access to the system controls.

Two full duplex RS232 ports that are site configurable for baud rate/handshaking are available for site programming and interfacing to BMS, Colour Graphics or Pager systems.

6400/LPN - Loop Processing Node

The 6400/LPN nodes process the loop data from the field devices, communicate with other network nodes, and implement the cause and effects program for local and network fire signals. Sounder circuits and auxiliary change-over contacts are also controlled from the 6400/LPN.

6400/DCN/LPN - Combined DCN and LPN (2 nodes)

The 6400/DCN and 6400/LPN are combined within a common enclosure. The appearance is the same as the 6400/DCN and uses the 6400/LPN back box to accommodate the cabling.

MÔ TẢ CHI TIẾT:

6400 Series Common Specification

Temperature Range	0 - 40°C.
Maximum Humidity	85% Non-Condensing.
Working Voltage	21.5 - 30V dc.
Secure Network	Dual channel RS485 fault tolerant communications network for up to 100 nodes. 3 wire loop (2 Data & 0V), maximum 1km between nodes.
Node Power Supply	Fault monitored dual path 24V dc from 6400/BC range PSU 4 wire plus 2 wire (2 Primary Power, 2 signals) (2 Sec. Power).
Total Node Load	Maximum load to a 6400/LPN or 6400/DCN/LPN is 6A.

6400/DCN

Standby Load (Mains Fail Condition)	210mA.
Alarm Load (Mains Fail Condition)	390mA.
Display	Quarter VGA Backlit Graphics LCD
Zones	100 Zone Fire indicators, plus common ‘FIRE’ indicator. Expandable to 800
Printer	40 column low noise thermal printer
Nodes	The 6400/DCN counts as one node on the network
RS232 Ports	Two full duplex RS232 ports for site programming, BMS, Colour Graphics or pager system interfacing
Auxiliary Output Supply	Two sets of 24V dc output terminals. Total load 1A
Common Fire Output (fire station)	24V dc fully monitored output rated at 20mA. 1K EOL
Common Fault Output (fire station)	24V dc fully monitored output rated at 20mA. 1K EOL.
Dimensions (mm)	440(W) x 385(H) x 104(D)
Approvals	LPCB Certificate No: 201ad/01 EC Certificate No: 0832-CPD-1434 Relevant Standard: EN 54-2

6400/LPN

Standby Load (Mains Fail Condition)	250mA (2 loop) 310mA (4 loop)
Alarm Load (Mains Fail Condition)	480mA (2 loop) 540mA (4 loop)
Analogue Addressable Loops	2 to 4 loops, each with 127 address capacity per loop. Total 6400/LPN capacity 4 loops, 508 addresses.
Total Loop Load	600mA per loop including all loop connected devices.
Nodes	The 6400/LPN counts as one node on the network.
Programmable Alarm Outputs	8 monitored 24V dc sounder circuits 1A rated. 47K EOL. 6 non monitored - clean changeover contacts (1A rated @24V). Expansion modules available to increase alarm output capability. Up to 127 programmable alarm outputs per loop using loop output devices. Total node load 6A.
Auxiliary Output Supply	Four sets of 24V dc output terminals. Total load 1A.
Common Fire Output (fire station)	24V dc fully monitored output rated at 20mA. 1K EOL. Dedicated Clean Changeover contacts (1A rated @24V)
Common Fault Output (fire station)	24V dc fully monitored output rated at 20mA. 1K EOL. Dedicated Clean Changeover contacts (1A rated @24V)
Software Input Switches	Class change, bomb alert. Plus four additional non-dedicated inputs for day/night mode, etc
Dimensions (mm)	440(W) x 385(H) x 144(D).
Approvals	(2 loop) LPCB Certificate No: 201ad/02 EC Certificate No: 0832-CPD-1435 Relevant Standard: EN 54-2 & 4. (4 loop) LPCB Certificate No: 201ad/03 EC Certificate No: 0832-CPD-1436 Relevant Standard: EN 54-2 & 4.

6400/DCN/LPN

Overview	Combined 6400/DCN and 6400/LPN nodes within a common enclosure. The full specification for a 6400/LPN applies plus DCN controls.
Standby load (Mains Fail Condition)	380mA (2 loop) 440mA (4 loop).
Alarm Load (Mains Fail Condition)	770mA (2 loop) 830mA (4 loop).
Nodes	The 6400/DCN/LPN counts as TWO nodes on the network.
Dimensions (mm)	440(W) x 385(H) x 144(D).
Approvals	(2 loop) LPCB Certificate No: 201ad/04 EC Certificate No: 0832-CPD-1437 Relevant Standard: EN 54-2 & 4 (4 loop) LPCB Certificate No: 201ad/05 EC Certificate No: 0832-CPD-1438 Relevant Standard: EN 54-2 & 4.