English Việt Nam
DANH MỤC SẢN PHẨM
TIN TỨC MỚI
Hà Nội trang bị kiến thức phòng cháy cho hơn 3000 giá viên
GD&TĐ - Công an TP Hà Nội phối hợp với Sở GD&ĐT Hà Nội vừa tổ chức lớp tập huấn nghiệp vụ phòng cháy, chữa cháy và cứu ...
KHÔNG LẼ BẤT LỰC???
Nguy cơ cháy nổ tại nhà cao tầng đã và đang trở thành mối đe dọa trong đời sống dân cư đô thị....
Xem toàn bộ
THÔNG TIN CẦN BIẾT
Lịch chiếu phim rạp
Tỉ giá ngoại tệ
Thông tin chứng khoán
Thông tin giá vàng
Kết quả xổ số
QUẢNG CÁO
 
OPTICAL FLAME FIRE DETECTOR FD8040

Optical flame fire detector FD 8040 is designed to provide early warning of a fire condition responding to open flame. The fire detector reacts within the light spectrum of the flame and has maximum sensitivity of the infrared range.

   MÔ TẢ CHI TIẾT:

PRODUCT DESCRIPTION

Optical flame fire detector FD 8040 is designed to provide early warning of a fire condition responding to open flame. The fire detector reacts within the light spectrum of the flame and has maximum sensitivity of the infrared range. The opearation principle is based on the reception of flame emissions with their typical flicker frequency within the whole spectrum range. The infrared sensor signal – amplified, filtered and shaped is being sent to the time delay circuit. If the flame impact has decreased during the time delay , the fire detector dos not activate.

The fire detector consists of printed board, mounted in a plastic body with optical filter and bottom side. The flat point pivot screw (optional) prevents the fire detector of unauthorized removal. A 2 mm tip screwdriver is required for locking and unlocking. The two red LEDs of the fire detector are indicating fire condition, providing 360 angle visibility. It is recommended that the fire detectors are mounted in premises, where a possible development of fire condition is supplemented by flame. Avoid mountong in premises with flickering lights. The fire detectors shall be mounted on the ceiling in a way, that do not alow explosure to direct sunlight.

TECHNICAL DATA

Supply voltage: (from12- to30)V DC
Current consumption in Duty Mode: 300 μA

Current consumption in Fire condition
– with a base type 8000 & 8000D: 8mA/12V DC;- 25mA/ 30V DC
– with a base type 8000R & 8000DR: 18mA/12V DC;- 55mA/ 30V DC

Sensitivity: in accordance with EN54-10, class 2 (IR)
Time delay: T-10s ( optional T-5s;T-20s)
Protected area: Angle of visibility 45o
Type of the line connection: two-wire
Degree of protection: IP 40
Operation Temperature Range: from Minus 10 oC to 55 oC
Relative humidity resistance: (92±3)% at 40 oC
Dimensions: (base type 8000 included) 100mm h 47 mm Ø
Output in Alarm condition: Terminal RI/KL for RI31 or RI31S
Cross section of the connection wire: (0.8-1.5mm2)

   TẢI TÀI LIỆU:
LIÊN HỆ ĐẶT MUA
SẢN PHẨM KHÁC
Còi Báo Cháy 8204С
VHEM 350 / CX / CXT
PC 635
 
HỖ TRỢ TRỰC TUYẾN
Hỗ trợ kỹ thuật
HOTLINE: (028) 3840 4901
Hỗ trợ kinh doanh
Mr. ĐỖ HUY DƯƠNG: 0903.848.989
ĐỐI TÁC
THỐNG KÊ
Đang online: 3
Tổng truy cập: 2558135
Copyright 2008 - 2012 by PCCC4-10 company - Designed by EATech Corp