PCCC4-10


	English		Việt Nam

DANH MỤC SẢN PHẨM

TIN TỨC MỚI

Hà Nội trang bị kiến thức phòng cháy cho hơn 3000 giá viên
GD&TĐ - Công an TP Hà Nội phối hợp với Sở GD&ĐT Hà Nội vừa tổ chức lớp tập huấn nghiệp vụ phòng cháy, chữa cháy và cứu ...

KHÔNG LẼ BẤT LỰC???
Nguy cơ cháy nổ tại nhà cao tầng đã và đang trở thành mối đe dọa trong đời sống dân cư đô thị....

Xem toàn bộ

THÔNG TIN CẦN BIẾT

	Lịch chiếu phim rạp
	Tỉ giá ngoại tệ
	Thông tin chứng khoán
	Thông tin giá vàng
	Kết quả xổ số

QUẢNG CÁO

Early-Warning Fire Cirrus Pro 100

The new range of Cirrus Pro Series Aspirating Fire Detectors provide a solution for almost any aspirating system project, from a simple single pipe detector with minimum ‘Fire’ and ‘Fault’ LED indications to a multiple pipe scanning detector with multifunction quarter VGA backlit LCD display. Programming for each detector is via a laptop computer or from an onboard or remotely mounted LCD display.

The Cirrus Pro 100

‘Cloud Chamber’ aspirating fire detector
For use with up to a total of 100mtrs of 25mm diameter sampling pipe.
Single sampling pipe ‘inlet’ port, single sampling pipe ‘exhaust’ port.
LED status indication of Common Fault, Power, Pre-alarm, Fire 1, Fire 2, Fire 3 alarm conditions
Internal buzzer ‘Silence’ button, detector alarm ‘Reset’ Button.
May be networked with other Cirrus Pro Series aspirating detectors

MÔ TẢ CHI TIẾT:

Supply Voltage	20 - 29VDC
Power Consumption	7.2 watts quiescent (24VDC 90% Fan Speed)
Current Consumption	350mA quiescent 50mA alarm (24VDC 90% Fan Speed)
Dimensions (mm)	285(W) x 215(H) x 144(D)
Weight	4kg (8.8lbs)
Operating Conditions Detector Ambient	0°C to 38°C (32°F to 100°F)
Operating Conditions Tested to	0°C to 55°C (32°F to 131°F)
Operating Conditions Sampled Air	-20°C to 60°C (-4°F to 140°F)
Operating Conditions Humidity	10 - 95%RH, non-condensing
IP Rating	IP30
Cable Access	6 x 20mm knock outs
Cable Termination	Screw terminal blocks (0.2 - 2.5mm2, 30 - 12AWG)
Sampling Network	Single inlet port with combined sampling pipe length up to 100m typically (325ft.) Maximum Transport Time allowed up to 120 seconds.
Pipe ID	19 to 25mm (preferred OD 25mm)
Alarm Indications	Pre-alarm, Fire 1, Fire 2, Fire 3.
Other Indications	Supply Healthy, General Fault.
Sensitivity Range	20,000 particles per cc to 3 million particles per cc 10 programmable sensitivity ranges.
Programmable Inputs	4 monitored inputs that may be configured for Isolate, Reset, Disable, Fault, Gain Set, Battery Fault and Mains Fault, Silence and Reset button, Disable.
Programmable Output Relays	5 Relays rated 1A @ 30VDC (Volt-free change over contacts)
Event Log	128 events stored on FIFO basis.
Data Retention	Approx 10 day historical graph
Variable Sensitivity Settings	7 day programmable settings with 3 time zones per day.
Airflow Monitoring Adjustable	‘High Airflow’ and ‘Low Airflow’ fault monitoring.